|last edited by: David Hernandez on Feb 4, 2020 1:12 PM||login/register to edit this page|
Extreme programming (XP) is a software development methodology which is intended to improve software quality and responsiveness to changing customer requirements. As a type of agile software development, it advocates frequent "releases" in short development cycles, which is intended to improve productivity and introduce checkpoints at which new customer requirements can be adopted. Other elements of extreme programming include: programming in pairs or doing extensive code review, unit testing of all code, avoiding programming of features until they are actually needed, a flat management structure, code simplicity and clarity, expecting changes in the customer's requirements as time passes and the problem is better understood, and frequent communication with the customer and among programmers. The methodology takes its name from the idea that the beneficial elements of traditional software engineering practices are taken to "extreme" levels. As an example, code reviews are considered a beneficial practice; taken to the extreme, code can be reviewed continuously, i.e. the practice of pair programming.
History Kent Beck developed extreme programming during his work on the Chrysler Comprehensive Compensation System (C3) payroll project. Beck became the C3 project leader in March 1996. He began to refine the development methodology used in the project and wrote a book on the methodology (Extreme Programming Explained, published in October 1999). Chrysler cancelled the C3 project in February 2000, after seven years, when Daimler-Benz acquired the company. Many extreme-programming practices have been around for some time; the methodology takes "best practices" to extreme levels. For example, the "practice of test-first development, planning and writing tests before each micro-increment" was used as early as NASA's Project Mercury, in the early 1960s. To shorten the total development time, some formal test documents (such as for acceptance testing) have been developed in parallel with (or shortly before) the software being ready for testing. A NASA independent test group can write the test procedures, based on formal requirements and logical limits, before programmers write the software and integrate it with the hardware. XP takes this concept to the extreme level, writing automated tests (sometimes inside software modules) which validate the operation of even small sections of software coding, rather than only testing the larger features.
Origins Two major influences shaped software development in the 1990s: Internally, object-oriented programming replaced procedural programming as the programming paradigm favored by some developers. Externally, the rise of the Internet and the dot-com boom emphasized speed-to-market and company growth as competitive business factors. Rapidly changing requirements demanded shorter product life-cycles, and often clashed with traditional methods of software development. The Chrysler Comprehensive Compensation System (C3) started in order to determine the best way to use object technologies, using the payroll systems at Chrysler as the object of research, with Smalltalk as the language and GemStone as the data access layer. Chrysler brought in Kent Beck, a prominent Smalltalk practitioner, to do performance tuning on the system, but his role expanded as he noted several problems with the development process. He took this opportunity to propose and implement some changes in development practices - based on his work with his frequent collaborator, Ward Cunningham. Beck describes the early conception of the methods: The first time I was asked to lead a team, I asked them to do a little bit of the things I thought were sensible, like testing and reviews. The second time there was a lot more on the line. I thought, "Damn the torpedoes, at least this will make a good article," asked the team to crank up all the knobs to 10 on the things I thought were essential and leave out everything else. Beck invited Ron Jeffries to the project to help develop and refine these methods. Jeffries thereafter acted as a coach to instill the practices as habits in the C3 team. Information about the principles and practices behind XP disseminated to the wider world through discussions on the original wiki, Cunningham's WikiWikiWeb. Various contributors discussed and expanded upon the ideas, and some spin-off methodologies resulted (see agile software development). Also, XP concepts have been explained, for several years, using a hypertext system map on the XP website at http://www.extremeprogramming.org circa 1999. Beck edited a series of books on XP, beginning with his own Extreme Programming Explained (1999, ISBN 0-201-61641-6), spreading his ideas to a much larger audience. Authors in the series went through various aspects attending XP and its practices. The series included a book critical of the practices.
Current state XP generated significant interest among software communities in the late 1990s and early 2000s, seeing adoption in a number of environments radically different from its origins. The high discipline required by the original practices often went by the wayside, causing some of these practices, such as those thought too rigid, to be deprecated or reduced, or even left unfinished, on individual sites. For example, the practice of end-of-day integration tests for a particular project could be changed to an end-of-week schedule, or simply reduced to testing on mutually agreed dates. Such a more relaxed schedule could avoid people feeling rushed to generate artificial stubs just to pass the end-of-day testing. A less-rigid schedule allows, instead, the development of complex features over a period of several days. Meanwhile, other agile-development practices have not stood still, and as of 2019 XP continues to evolve, assimilating more lessons from experiences in the field, to use other practices. In the second edition of Extreme Programming Explained (November 2004), five years after the first edition, Beck added more values and practices and differentiated between primary and corollary practices. The Theory of Sustainable Software Development explains why extreme programming teams can thrive in spite of team disruptions.
Concept Goals Extreme Programming Explained describes extreme programming as a software-development discipline that organizes people to produce higher-quality software more productively. XP attempts to reduce the cost of changes in requirements by having multiple short development cycles, rather than a long one. In this doctrine, changes are a natural, inescapable and desirable aspect of software-development projects, and should be planned for, instead of attempting to define a stable set of requirements. Extreme programming also introduces a number of basic values, principles and practices on top of the agile programming framework.
Activities XP describes four basic activities that are performed within the software development process: coding, testing, listening, and designing. Each of those activities is described below.
Coding The advocates of XP argue that the only truly important product of the system development process is code – software instructions that a computer can interpret. Without code, there is no working product. Coding can be used to figure out the most suitable solution. Coding can also help to communicate thoughts about programming problems. A programmer dealing with a complex programming problem, or finding it hard to explain the solution to fellow programmers, might code it in a simplified manner and use the code to demonstrate what he or she means. Code, say the proponents of this position, is always clear and concise and cannot be interpreted in more than one way. Other programmers can give feedback on this code by also coding their thoughts.
Testing Main article: Test-driven development Testing is central to extreme programming. Extreme programming's approach is that if a little testing can eliminate a few flaws, a lot of testing can eliminate many more flaws. Unit tests determine whether a given feature works as intended. Programmers write as many automated tests as they can think of that might "break" the code; if all tests run successfully, then the coding is complete. Every piece of code that is written is tested before moving on to the next feature. Acceptance tests verify that the requirements as understood by the programmers satisfy the customer's actual requirements. System-wide integration testing was encouraged, initially, as a daily end-of-day activity, for early detection of incompatible interfaces, to reconnect before the separate sections diverged widely from coherent functionality. However, system-wide integration testing has been reduced, to weekly, or less often, depending on the stability of the overall interfaces in the system.
Listening Programmers must listen to what the customers need the system to do, what "business logic" is needed. They must understand these needs well enough to give the customer feedback about the technical aspects of how the problem might be solved, or cannot be solved. Communication between the customer and programmer is further addressed in the planning game.
Designing From the point of view of simplicity, of course one could say that system development doesn't need more than coding, testing and listening. If those activities are performed well, the result should always be a system that works. In practice, this will not work. One can come a long way without designing but at a given time one will get stuck. The system becomes too complex and the dependencies within the system cease to be clear. One can avoid this by creating a design structure that organizes the logic in the system. Good design will avoid lots of dependencies within a system; this means that changing one part of the system will not affect other parts of the system.
Values Extreme programming initially recognized four values in 1999: communication, simplicity, feedback, and courage. A new value, respect, was added in the second edition of Extreme Programming Explained. Those five values are described below.
Communication Building software systems requires communicating system requirements to the developers of the system. In formal software development methodologies, this task is accomplished through documentation. Extreme programming techniques can be viewed as methods for rapidly building and disseminating institutional knowledge among members of a development team. The goal is to give all developers a shared view of the system which matches the view held by the users of the system. To this end, extreme programming favors simple designs, common metaphors, collaboration of users and programmers, frequent verbal communication, and feedback.
Simplicity Extreme programming encourages starting with the simplest solution. Extra functionality can then be added later. The difference between this approach and more conventional system development methods is the focus on designing and coding for the needs of today instead of those of tomorrow, next week, or next month. This is sometimes summed up as the "You aren't gonna need it" (YAGNI) approach.Proponents of XP acknowledge the disadvantage that this can sometimes entail more effort tomorrow to change the system; their claim is that this is more than compensated for by the advantage of not investing in possible future requirements that might change before they become relevant. Coding and designing for uncertain future requirements implies the risk of spending resources on something that might not be needed, while perhaps delaying crucial features. Related to the "communication" value, simplicity in design and coding should improve the quality of communication. A simple design with very simple code could be easily understood by most programmers in the team.
Feedback Within extreme programming, feedback relates to different dimensions of the system development: Feedback from the system: by writing unit tests, or running periodic integration tests, the programmers have direct feedback from the state of the system after implementing changes. Feedback from the customer: The functional tests (aka acceptance tests) are written by the customer and the testers. They will get concrete feedback about the current state of their system. This review is planned once in every two or three weeks so the customer can easily steer the development. Feedback from the team: When customers come up with new requirements in the planning game the team directly gives an estimation of the time that it will take to implement. Feedback is closely related to communication and simplicity. Flaws in the system are easily communicated by writing a unit test that proves a certain piece of code will break. The direct feedback from the system tells programmers to recode this part. A customer is able to test the system periodically according to the functional requirements, known as user stories.To quote Kent Beck, "Optimism is an occupational hazard of programming. Feedback is the treatment."
Courage Several practices embody courage. One is the commandment to always design and code for today and not for tomorrow. This is an effort to avoid getting bogged down in design and requiring a lot of effort to implement anything else. Courage enables developers to feel comfortable with refactoring their code when necessary. means reviewing the existing system and modifying it so that future changes can be implemented more easily. Another example of courage is knowing when to throw code away: courage to remove source code that is obsolete, no matter how much effort was used to create that source code. Also, courage means persistence: a programmer might be stuck on a complex problem for an entire day, then solve the problem quickly the next day, but only if they are persistent.
Respect The respect value includes respect for others as well as self-respect. Programmers should never commit changes that break compilation, that make existing unit-tests fail, or that otherwise delay the work of their peers. Members respect their own work by always striving for high quality and seeking for the best design for the solution at hand through refactoring. Adopting the four earlier values leads to respect gained from others in the team. Nobody on the team should feel unappreciated or ignored. This ensures a high level of motivation and encourages loyalty toward the team and toward the goal of the project. This value is dependent upon the other values, and is oriented toward teamwork.
Rule The first version of rules for XP was published in 1999 by Don Wells at the XP website. 29 rules are given in the categories of planning, managing, designing, coding, and testing. Planning, managing and designing are called out explicitly to counter claims that XP doesn't support those activities. Another version of XP rules was proposed by Ken Auer in XP/Agile Universe 2003. He felt XP was defined by its rules, not its practices (which are subject to more variation and ambiguity). He defined two categories: "Rules of Engagement" which dictate the environment in which software development can take place effectively, and "Rules of Play" which define the minute-by-minute activities and rules within the framework of the Rules of Engagement.
Here are some of the rules (incomplete): Coding The customer is always available Code the unit test first Only one pair integrates code at a time Leave optimization until last No overtime Testing All code must have unit tests All code must pass all unit tests before it can be released. When a bug is found, tests are created before the bug is addressed (a bug is not an error in logic; it is a test that was not written) Acceptance tests are run often and the results are published
Principles The principles that form the basis of XP are based on the values just described and are intended to foster decisions in a system development project. The principles are intended to be more concrete than the values and more easily translated to guidance in a practical situation.
Feedback Extreme programming sees feedback as most useful if it is done frequently and promptly. It stresses that minimal delay between an action and its feedback is critical to learning and making changes. Unlike traditional system development methods, contact with the customer occurs in more frequent iterations. The customer has clear insight into the system that is being developed, and can give feedback and steer the development as needed. With frequent feedback from the customer, a mistaken design decision made by the developer will be noticed and corrected quickly, before the developer spends much time implementing it. Unit tests contribute to the rapid feedback principle. When writing code, running the unit test provides direct feedback as to how the system reacts to the changes made. This includes running not only the unit tests that test the developer's code, but running in addition all unit tests against all the software, using an automated process that can be initiated by a single command. That way, if the developer's changes cause a failure in some other portion of the system that the developer knows little or nothing about, the automated all-unit-test suite will reveal the failure immediately, alerting the developer of the incompatibility of their change with other parts of the system, and the necessity of removing or modifying their change. Under traditional development practices, the absence of an automated, comprehensive unit-test suite meant that such a code change, assumed harmless by the developer, would have been left in place, appearing only during integration testing – or worse, only in production; and determining which code change caused the problem, among all the changes made by all the developers during the weeks or even months previous to integration testing, was a formidable task. Assuming simplicity This is about treating every problem as if its solution were "extremely simple". Traditional system development methods say to plan for the future and to code for reusability. Extreme programming rejects these ideas. The advocates of extreme programming say that making big changes all at once does not work. Extreme programming applies incremental changes: for example, a system might have small releases every three weeks. When many little steps are made, the customer has more control over the development process and the system that is being developed.
Embracing change The principle of embracing change is about not working against changes but embracing them. For instance, if at one of the iterative meetings it appears that the customer's requirements have changed dramatically, programmers are to embrace this and plan the new requirements for the next iteration.
|last edited by: David Hernandez on Feb 4, 2020 1:12 PM||login/register to edit this page|